DIY Resin Driveway Repair
Due to their low maintenance requirements and superb longevity, resin driveways are an extremely popular alternative to the less durable driveway materials, such as block paving. When installing a resin driveway to your property, you should seek a reputable installation company to achieve a long-lasting result. In unfortunate cases, resin driveways can crack or chip overtime, for small damages such as these, there are DIY resin driveway repair procedures. Although, with more significant damages, you will need to contact a professional. Throughout this blog post, we will discuss some repair tips in the unlikely event of cracks or chips.
Asses The Damage
Prior to beginning any repairs, you should inspect the driveway for any obvious chips, cracks or stains. This is your opportunity to assess the size and severity and decide whether you will need a professional repair team, or whether it can be fixed with a DIY method by yourself.
Materials and Equipment
In order to carry out a successful repair on your driveway, you will need the correct tools and equipment such as epoxy resin, a mixing cup, a putty knife, a stirring utensil, sandpaper and a heat gun or hairdryer. Before commencing the work, ensure you have all the required equipment for a successful repair.
Repairing Chips and Cracks
When fixing small chips and cracks, start by using water and a gentle detergent to clean the area and remove any built up dirt or debris. Using sandpaper to roughen up the edges of the crack will improve the area and allow the resin to stick better. After this, use a putty knife in order to mix the epoxy resin in line with the manufacturer's guide and apply it where necessary. Always make sure you allow enough time for the epoxy resin to cure and set before going in with a hairdryer to finish the drying process.
Removing Stains
If your resin driveway has been exposed to stains, use a degreaser or water and a light detergent to clean the area. In order to remove tough stains, use a pressure washer or brush to clean the surface, ensure you rinse the area thoroughly with water afterwards.
Preventative Maintenance
Regular maintenance and inspections will lead to less damage and discolouration on your driveways surface. Consider sealing your driveway with a protective coating in order to lower the risk of damage, you should then organise regular sweeping and pressure washing to remove any built up debris on the surface. Following these steps will significantly increase the lifespan of your resin driveway.
To conclude, minor cracks and stains are not the end of the world, there are DIY repairs you can carry out in order to prolong the aesthetic appeal of your resin driveway. With the right care and maintenance, you can significantly increase the longevity and appeal of your driveway. If you're carrying out any DIY repairs on your driveway, remember to follow manufacturers directions and safety precautions to prevent any accidents. Before installing a resin driveway, it is with the utmost importance that you seek a reputable resin driveway installation company to reduce the risk of cracks and stains occurring.
You might also like
Resin Driveways For Life
